SmartBridges airPoint Pro Series User Manual
Page 3
s m a r t
Bridges
to the future ...
Revision 1.8
Page 3 of 28
for airPoint-PRO Outdoor / airPoint-PRO TOTAL
Important note - Earthing Requirements:
Follow National Electric Code NEC 810-20 and NEC 810-21 for this installation.
Mounting the airPoint-PRO Outdoor
Fix the airPoint-PRO Outdoor unit with the U bolts to the steel pipe. Make sure to tighten
both top and bottom mounting plates to the pipe with U bolts, nuts and spring washers.
Tighten the nuts so that the airPoint-PRO Outdoor does not rotate on the pipe. The
mounting should be such that the antenna socket, LED's, ethernet cable outlet etc face
downward. The airPoint-PRO Outdoor is weather proof box made to NEMA 4 specs.
There are no user adjustable parts inside and it is recommended that the unit is used in
the same way it is shipped.
Note:
Do not mount the unit upside down with connectors facing up. In this position water will
leak inside through the drain plug.