SmartBridges airPoint Pro Series - Manual (Page 20)

s m a r t Bridges
to the future ...
Revision 1.8 Page 20 of 28
Note: Client to Client communication TAB is disabled in the repeater mode
If the client gets disassociated from the airPoint-PRO due to any reason ( power down etc ) you will
continue to see the entry in the list for upto 5 minutes, before it is removed from the list.
You can Enable/Disable the communication between the individual clients by clicking the Disable
Client to Client Communication check box.
Note: - 128 Clients can associate simultaneously with airPoint-PRO.
Authorizing the Clients for airPoint-PRO
You can pre-authorize the clients associating with airPoint-PRO by selecting the Client Auth Tab of
simpleMonitor. airPoint-PRO supports two different authorization schemes as below. Please select
between the schemes or you may disable the authorization algorithm.
Internal MAC based Authorization
External Radius Server Authorization
Internal MAC based Authorization
Note: - 680 Clients can be authorized with airPoint-PRO. The authorized client table can be retrieved
from the Access Point by using Read Table option. If the entries are found then it will be displayed
on the screen or one need to key in the entries. Entries can be entered one by one manually or by
using the entries in the file.