Samsung CDI-E090-010 - Manual (Page 120)

114
Automated Playback (Slide Show)
Slide show image settings are based on DPOF standards (p. 122).
Starting a Slide Show
All images, or a selection of images, can be displayed one-by-one in an automated slide show.
1 In the [ (Replay)] menu, select [Slide
Show] and press .
See Selecting Menus and Settings (p. 36).
2 Select [Program] using
C or D on the
multicontroller. Then select between [All
Images] or one of [Show 1]-[Show 3] using
B or A on the multicontroller.
3
Select [Start] using
C or D on the
multicontroller and press .
The slide show will start and automatically stop when the show is done.
Pausing and Resuming a Slide Show
Press
to pause the show. Press it again to resume.
Fast Forward / Rewinding a Slide Show
Use
B or A on the multicontroller to move to the previous or next image.
Stopping a Slide Show
Press the
button during a slide show to stop it and display the slide
show menu.
4 When the slide show is over, press the button.
The slide show menu appears again. Press the button again to close
the menu.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Movie images play for the length of time that they were recorded regardless of the
time set in the slide show settings.
• The power-saving function is disabled while a slide show plays on the camera (p. 25).
All Images Plays all the images on the CF card in order
Slide Show 1 - 3 Plays the images selected for each show in order (p. 115)