Samsung CDI-E090-010 - Manual (Page 149)

143
Printing, T
ransferring
3
Select images for transferring.
Single Images
• Select an image using
B or A on the
multicontroller and mark or remove marks from
images using
C or D on the multicontroller.
• You can use the same procedures to select images in
index replay (3 images). Press the button to
switch between single replay and index replay.
All the Images on a CF Card
• Press the button to switch to index replay (three
images).
• Then press , and select [Mark All] using
C or D
on the multicontroller and press again. (If you
select [Clear All] instead of [Mark All], you can
remove marks from all the images.)
• You can mark or remove a mark from each
image after marking or removing marks from all
the images.
4
Press the button.
The selection mode will turn off and the Transfer Order menu will reappear.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Images are transferred in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.