Samsung CDI-E090-010 - Manual (Page 79)

73
Shooting - Selecting Par
ticular Ef
fects
Manually Setting the Shutter Speed and Aperture
You can manually set the shutter speed and aperture to achieve a particular effect.
This is convenient for shooting fireworks and other images where it is difficult to
set the correct exposure automatically.
1
Turn the shooting mode dial to .
The shutter speed and aperture value appears on the LCD
monitor if it is on.
2
Select a shutter speed using
B or A on
the multicontroller.
3
Select an aperture value using
C or D on
the multicontroller.
4
Shoot the image.
When you press the shutter button halfway, a number indicating the
difference between the standard exposure* and the selected exposure
appears on the LCD monitor. If the difference is more than ±2 steps, “-2” or
“+2” appears in red.
* The standard exposure is calculated by the AE function according to the selected metering mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Functions Available in Each Shooting Mode (p. 180)
• If you wish to change the exposure, adjust the shutter speed using
B or A on the
multicontroller, or adjust the aperture using
C or D on the multicontroller.
• The LCD monitor's brightness matches the selected shutter speed and aperture
value. When you select a fast shutter speed or shoot a subject in a dark place and
set the flash to
(Red-Eye Reduction, Flash On) or (Flash On) the LCD
monitor will always light up.
• For the correlation between aperture value and shutter speed, see page 70.