Samsung CDI-E090-010 - Manual (Page 82)

76
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 180)
• Turn the LCD monitor on to set the AF frame to the position you desire before
shooting.
• The AF frame is locked to center-point when using the digital zoom.
• When the Spot AE Point is selected as the light metering mode, you can use the
selected AF frame as the Spot AE Point (p. 77).
• When the AF frame is set to manual selection, it will move to the center if you
continuously press .
• For an explanation of the AF frame colors, please refer to page 33.
• If the Shooting mode is changed, the AF frame may also change depending on
the Shooting mode. See the table below.
If you switch to mode, the AF frame will change to the setting previously
saved with the [Save Settings] function. When switching to any other
Shooting mode, the AF frame settings will change to the settings of the
mode you switched to.
Regarding the AF Frame
AiAF* has a wide range of measuring for accurate focusing. AiAF focuses on the
object even if it is not exactly in the center of the frame.
* “Ai” stands for “Artificial intelligence” and “AF” stands for “Auto Focus.”
Selecting an AF Frame (continued)
P Tv Av M
P Tv Av M
P Tv Av M
P Tv Av M
Initial Shooting Mode Next Shooting Mode
AF frames after
change
Auto Selection
No change
Auto Selection
Center-Point