Samsung CDI-E090-010 - Manual (Page 140)

134
2
Trim the Image.
Changing the Size of the Trimming Frame
• Slide the zoom lever toward or
.
• The trimming frame can be changed to a
minimum selection of approximately half the
displayed image or a maximum selection that is
virtually the same size as the image.
• When printing an image that has been magnified using the trimming
option, the image quality may become coarser and grainier depending on
the magnifying rate. With direct print function compatible printers, the
trimming frame displays in red.
Setting the Portion of the Trimming Frame
Move the trimming frame using
C, D, B or A on the multicontroller.
Rotating the Trimming Frame
You can rotate the trimming frame by pressing the
button.
Canceling the Trimming Frame
You can cancel the trimming setting by pressing the
button or by
sliding the zoom lever toward again when the trimming frame is already
set to the maximum size.
3 Press to close the setting menu.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• The trimming setting only applies to one image.
• The trimming setting is cancelled with the following operations.
- When you set the trimming settings for another image.
- When you close the Print mode (when you turn the camera power off, change
the camera mode, or detach the direct interface cable).
- When you try to expand the trimming frame beyond its maximum size.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• The selected Image Settings, Paper and Border setting determine the shape of the
trimming frame.
• Please use the LCD monitor to set the trimming settings. The trimming frame may
not display correctly on a TV monitor.
Trimming Frame
Setting the Print Settings (Direct Print Function) (continued)