Symbol Technologies VC5090 - Manual (Page 110)

4 - 34 VC5000 Vehicle Computer Product Reference Guide
Figure 4-44 Regulatory Options Dialog Box
Band Selection
The
Band Selection
settings identify the frequency bands to scan when finding WLANs. These values refer to
the 802.11 standard networks.
Figure 4-45 Band Selection Dialog Box
Tap
Save
to save the settings or tap
X
to discard any changes.
System Options
Use
System Options
to set miscellaneous system setting.
Table 4-24 Regulatory Options
Field Description
Settings Select the country from the drop-down list. To connect to a profile, the profile country
must match this setting, or the AP country setting if you selected the
Enable 802.11d
check box.
Enable 802.11d The WLAN adapter attempts to retrieve the country from APs. Profiles which use
Infrastructure
mode can only connect if the country set is the same as the AP country
settings or if the profile country setting is
Allow Any Country
. All APs must be
configured to transmit the country information.
Table 4-25 Band Selection Options
Field Description
5GHz Band The
Find WLANs
application list includes all networks found in the 5 GHz band (802.11a).
2.4GHz Band The
Find WLANs
application list includes all networks found in the 2.4 GHz band (802.11b
and 802.11g).