Symbol Technologies VC5090 - Manual (Page 62)

3 - 4 VC5090 Vehicle Computer Product Reference Guide
Launch Application
To set a programmable key to launch an application:
1.
In the
Action
drop-down list, select
Launch Application
.
Figure 3-4 Configure Programmable Keys - Launch Application
2.
In the
Application Path
field enter the path and application or tap the button to browse through the folders to
find the application file.
3.
In the
Command Line
field, enter any specific commands for the selected application.
4.
Tap
OK
.
Simulate KeyPress
To set a programmable key to simulate a key press:
1.
In the
Action
drop-down list, select
Simulate KeyPress
.
Figure 3-5 Configure Programmable Keys - Simulate KeyPress
2.
In the
Modifiers
field, select one of the check boxes.
3.
In the
Key Press
drop-down list, select a key (character).
4.
Select the
Repeat Key
check box to allow the key press to continuously repeat as long as the
P
button is
pressed.
5.
Tap
OK
.