Symbol Technologies VC5090 - Manual (Page 71)

Operating the VC5090 3 - 13
Calibrating the Screen
Using the Display
This section describes how to calibrate the VC5090 touch screen. If the current calibration does not allow for
easy touch screen input or you want to recalibrate the screen at any time, refer to Using the Keyboard on page
3-14
.
To calibrate your VC5090:
1.
Tap >
Settings > Control Panel
>
Stylus
icon >
Calibration
tab.
Figure 3-18 Stylus Properties - Calibration Tab Window
2.
Tap the
Recalibrate
button. The calibration screen displays.
CAUTION
Do not use sharp objects when touching the screen. Use your finger tip or a stylus when touching the
screen.