Symbol Technologies VC5090 - Manual (Page 90)

4 - 14 VC5000 Vehicle Computer Product Reference Guide
Password
Use the
Password
dialog box to enter a password. If EAP/TLS is the selected authentication type, the
password is not required and the field is disabled.
Figure 4-17 Password Dialog Box
1.
Enter a password in the
Password
field.
2.
Select the Advanced ID check box, if advanced identification is required.
3.
Tap Next. The Encryption dialog box displays. See Encryption on page 4-15.
Advanced Identity
Use the Advanced ID dialog box to enter the 802.1X identity to supply to the authenticator. This value can be
63 characters long and is case sensitive. In TTLS and PEAP, it is recommended entering the identity
anonymous
(rather than a true identity) plus any desired realm (e.g., anonymous@myrealm). A user ID is
required before proceeding.
Figure 4-18 Advanced Identity Dialog Box
Tap
Next
. The
Encryption
dialog box displays.
NOTE
When authenticating with a Microsoft IAS server, do not use advanced identity.