Sony HDW-1800 - Manual (Page 67)

67
8-2 Function Menu Item List
Ch
apt
er 8
F
u
nc
tio
n
Men
u
P04: MISC-1
This is a function menu page for setting other items.
P05: MISC-2
This is a function menu page for setting other items.
F9 (SETUP
LV) (59.94i
mode)/(BLK
LEVL) (50i
mode) Set the HD/SD output setup level (59.94i
mode) or black level (50i mode)
PRESET: Regardless of manually set
values, the level is set to the standard
value.
Manual setting: With the displayed setting
flashing, turn the MULTI CONTROL
knob to adjust the setup level across the
range ±30 IRE (59.94i mode) or to
adjust the black level across the range
±210 mV (50i mode).
F10
(PRESET) Function for setting the level control to
“PRESET (UNITY)”
Item Setting
F1
(CAPSTAN) Select the number of fields for capstan lock in
playback and editing.
In 59.94i, 29.97PsF system
2F: The capstan servo locks in units of 2
fields.
• For tape output, color framing may not
match the reference signal selected
with F2 (REF VID) in P03:VID PROC.
• In assemble editing, color framing may
not be continuous at edit points.
4F: The capstan servo locks in units of 4
fields.
• For tape output, color framing matches
the reference signal selected with F2
(REF VID) in P03:VID PROC.
• In assemble editing, color framing is
continuous at edit points.
In 50i, 25PsF system
2F: The capstan servo locks in units of 2
fields.
• For tape output, color framing may not
match the reference signal selected
with F2 (REF VID) in P03:VID PROC.
• In assemble editing, color framing may
not be continuous at edit points.
4F: The capstan servo locks in units of 4
fields.
• For tape output, color framing may not
match the reference signal selected
with F2 (REF VID) in P03:VID PROC.
• In assemble editing, color framing may
not be continuous at edit points.
8F: The capstan servo locks in units of 8
fields.
• For tape output, color framing matches
the reference signal selected with F2
(REF VID) in P03:VID PROC.
• In assemble editing, color framing is
continuous at edit points.
The setting is fixedly “2F” when the system
frequency is 23.98PsF or 24PsF.
Item Setting
F2 (No function assigned)
F3
(PREREAD) Specify whether to preread (read before
write) in insert editing.
ON: Preread depending on the setting in setup
menu item 319.
OFF: Do not preread.
F4 (No function assigned)
F5 (CHARA) Specify whether to superimpose the text
information including timecode, menu
settings, and error messages over the video
signals output from the HDSDI OUTPUT3
(SUPER) connector, SDI OUTPUT3 (SUPER)
connector and COMPOSITE VIDEO
OUTPUT3 (SUPER) connector.
ON: Superimpose.
OFF: Do not superimpose.
F6 (T-INFO) Select the content of tape information to
display in the ancillary message display.
TOTAL: Display total recorded time.
REMAIN: Display remaining time.
F7 (No function assigned)
F8 (No function assigned)
F9 (No function assigned)
F10 (No function assigned)
Item Setting
F1 (No function assigned)
F2 (UMID) Displays UMID information during recording
or playback.
For details of UMID, see Chapter 7.
F3
(SHOT MRK) Jump to P104: SHOT MRK (shot mark
page).
F4 (No function assigned)
F5 (No function assigned)
F6 (No function assigned)
F7 (No function assigned)
F8
(FREEZE) Freeze an image while selected when setup
menu item 904 for setting the freeze
operation is set to “MOMNT”. When setup
menu item 904 is set to “LATCH”, the freeze
continues even after this button is released.
When this button is pressed again in the
freeze on state, the freeze image is updated
and the freeze restarts.
F9
(FREZ OFF) Release an image from the freeze off state
when setup menu item 904 is set to
“LATCH”.
F10 (No function assigned)
Item Setting