Sony HDW-1800 - Manual (Page 80)

80
9-4 Items in the Extended Setup Menu
Ch
apt
er 9 Set
up Men
u
s
9-4 Items in the Extended Setup Menu
The extended setup menu contains the following items.
In the “Settings” column of the table, the factory default
settings are underlined.
Menu items in the range 100 to 199, relating to the control panels
Item number Item name Settings
101 SELECTION FOR
SEARCH DIAL ENABLE Select how the unit enters the search mode.
DIAL: Turning the search dial switches to search mode at all times except during
recording/editing.
KEY: Pressing one of the JOG, SHUTTLE, and VAR buttons switches to search
mode.
102 MAXIMUM SPEED Select the fast forward and rewind speed and also search mode speed during tape
playback.
MAX: Carry out fast forward, rewind, and search at the maximum speeds.
MX/24: Carry out fast forward and rewind at the maximum speeds, and search at
up to 24 times normal speed.
MX/35: Carry out fast forward and rewind at the maximum speeds, and search at
up to 35 times normal speed.
x24: Carry out fast forward and rewind at 24 times normal speed, and search at up
to 24 times normal speed.
x35: Carry out fast forward and rewind at 35 times normal speed, and search at up
to 35 times normal speed.
Maximum fast forward and rewind speed (example in 59.94i or 29.97PsF
mode)
• HDCAM cassette/Digital Betacam cassette: 50 times normal speed
• MPEG IMX cassette: 78 times normal speed
Maximum search mode speeds (example in 59.94i or 29.97PsF mode)
• HDCAM cassette/Digital Betacam cassette: 50 times normal speed
• MPEG IMX cassette: 78 times normal speed
104 AUDIO MUTING TIME Select the length of time for audio muting when the unit switches to playback from
stop or from still playback in the search mode.
OFF: Set the audio muting time to zero (i.e. no muting).
0.1S to 1.0S: Set the audio muting time from 0.1 to 1.0 second, in 0.1-second
increments.
105 REFERENCE SYSTEM
ALARM Select whether to display a warning when the video/audio reference signal
selected by OUTREF in function menu is not supplied or is out of phase with the
input video signal.
OFF: No warning.
ON: Flash the STOP button as a warning.
106 CAPSTAN LOCK
(Invalid in 24PsF or
23.98PsF mode) Select the capstan servo lock mode.
PANEL: The capstan servo lock mode is determined by CAPSTN in function menu.
2F: The capstan servo locks every two fields regardless of the setting of CAPSTN
in function menu.
4F: The capstan servo locks every four fields regardless of CAPSTN in function
menu.
8F (In 50i, 25PsF mode only): The capstan servo locks every eight fields
regardless of the setting of CAPSTN in function menu.
Note
When operating in 24PsF or 23.98PsF mode, 2F is selected automatically and this
item is not displayed.