Lcd monitor indicator, Starting the recording mode – Samsung digimax U-CA 501 User Manual

Page 19

Advertising
background image

19

LCD monitor indicator

15 Sharpness

p.42

16 Image

quality

p.38

17

Image size

2560, 2048, 1600, 1024, 640

p.37

Number of available shots remaining

18

Remaining time ( Movie clip/ Voice recording)

00:01:25 / 00:24:52

p.19~21

19

Digital zoom rate

X5.0

p.23

20

Digital zoom bar

21 Voice

memo

p.24

Starting the recording mode

If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.

Recording a Movie clip

1. Insert the batteries (p.14). Insert the batteries taking note

of the polarity (+ / -).

2. Insert the memory card. (p.17) As this camera has a

16MB internal memory, you do not need to insert the
memory card. If the memory card is not inserted, an image
will be stored in the internal memory. To expand memory
capacity, insert a memory card. If the memory card is
inserted, an image will be stored on the memory card.

3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Select the MOVIE CLIP( ) mode by sliding the

mode switch.

6. Point the camera towards the subject and compose the

image by using the LCD monitor.

7. Press the shutter button to take a movie clip.

Press the shutter button once and movie clips are recorded for as long as the available
recording time allows. Movie clips will still be recorded if the shutter button is released. If
you wish to stop recording, press the shutter button again.
Image size and type are listed below.

- Image size : 640X480, 320X240 (Selectable)

- File type : *. avi(MJPEG)

[ MOVIE CLIP mode ]

18

Advertising