Samsung digimax U-CA 501 - Manual (Page 72)

72
Formatting a memory card
Formatting a Memory Card
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FORMAT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : The memory card will not be formatted.
Press the menu button twice and the menu display will disappear.
If [YES] is selected : Select the [FORMAT] menu by pressing the UP/DOWN button and
press the OK button. A [PLEASE WAIT!] message appears and the
memory card will be formatted. If you ran FORMAT in Play mode, a
[NO IMAGE!] message will appear.
This is used for formatting the memory card. If you run [FORMAT] on the memory card, all
images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
If the memory card is not inserted, the internal memory will be formatted.
SETUP
PWR SAVE
LANGUAGE
FORMAT
BACK : SET : OK
NO
YES
P 2560
Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can t recognize or one that has been taken
from another camera.
Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a
[CARD ERROR!] message.
INFORMATION