Samsung digimax U-CA 501 - Manual (Page 74)

74
Date type
You can change the date type that will be displayed on the captured images.
Setting up the Date type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [DATE TYPE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- Date type : [YY/MM/DD] / [MM/DD/YY] / [DD/MM/YY]
5. Press the menu button twice and the menu will disappear.
There is an option to include DATE/ TIME on still images.
Date Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[OFF] : The DATE & TIME will not be imprinted on the image file.
[DATE] : Only the DATE will be imprinted on the image file.
[D&TIME] : The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
SETUP
DATE
TIME
DATE TYPE
YY/ MM/ DD
MM/ DD/ YY
DD/ MM/ YY
BACK : SET : OK
P 2560
SETUP
TIME
DATE TYPE
IMPRINT
OFF
DATE
D & TIME
BACK : SET : OK
P 2560
Imprinting the recording date
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute : Sec] and hours are shown using
the 24 hour clock.
The imprint function is applied only to still images.
INFORMATION