Samsung digimax U-CA 501 - Manual (Page 96)

96
Setting up the application software
21. After restarting the computer, connect the PC to the camera with the USB cable.
22. Turn the camera power on. [Found New
Hardware Wizard] will open and the computer will
recognise the camera.
* If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open. If the image viewer
program opens, the camera driver was setup
successfully.
23. If you can see [Removable Disk] under [My
computer], the camera driver installation was
successful. Now you can transfer image files
from the camera to PC via the USB cable.