Sharp Aquos LC G5C32U - Manual (Page 12)

11
Part names
RESET*
INPUT 3 terminals
SYSTEM RESET**
TV
Antenna input terminal
* Press RESET if the TV cannot return to its original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel setting (Air: 2ch, Cable:1 or 2ch)
• Audio setting initializes
• Dolby virtual resets to Off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 45 for clearing the secret number when you
know it. See page 60 for initializing to the factory preset values when you forget your secret number.
AC INPUT
terminal
RS-232C
terminal
INPUT 2 terminals INPUT 1 terminals
INPUT 5 terminals
INPUT 4 terminal
MONITOR OUTPUT terminals
***
***
*** Angle seen from below.
LC-26/32GA5U(E)-01-13 05.2.28, 1:09 PM 11