Sharp Aquos LC G5C32U - Manual (Page 17)

16
Watching TV
Simple button operations for
changing channels
You can change channels in several ways.
■ Using CHr/s on the remote control unit
• Press CH r r r r r to increase the channel number.
• Press CH s s s s s to decrease the channel number.
NOTE
• CH s/r on the TV operates the same as CH r r r r r/s s s s s on
the remote control unit.
■ Changing channels with CH r/s on the
remote control unit or CH s/r on the TV
Air: Press CH r and the channel change in the
order shown below:
2s3s...s68s69s2s3...
Press CH s and the channel change in the
order shown below:
3s2s69s68s...s3s2...
Cable: Press CH r and the channel change in the
order shown below:
1s2s3s...s125s1s2s3...
Press CH s and the channel change in the
order shown below:
3s2s1s125s...s3s2s1s...
■ Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9.
• The TV allows you to select up to 125 channels (1
to 125). To select a channel, enter a 2 or 3-digit
number.
NOTE
• When selecting a 1-digit channel number, do not fail to
press the 0 button.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following steps within 3 seconds.
CH s/r
a
To select a 1 or 2-digit channel number
(e.g., Channel 5):
Complete the following steps within 3 seconds.
Press the 0 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 5 button.
■ Using FLASHBACK on the remote control
unit
Press FLASHBACK to switch the currently tuned
channel to the previously tuned channel.
Press FLASHBACK again to switch back to the
currently tuned channel.
Press FLASHBACK to toggle between the currently
selected input source and the previously selected one.
NOTE
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Press the 1 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 1 button again.
• Complete the step 3 within 3 seconds after the
step 2.
Press the 5 button.
1
1
2
1
11
115
3
2
3 Press ENTER to enter the setting.
• Channel selection will be made if there is no
operations for 3 seconds.
0
05
LC-26/32GA5U(E)-14-18 05.2.28, 1:11 PM 16