Sharp Aquos LC G5C32U - Manual (Page 53)

52
Other viewing options
Cable control buttons
When the FUNCTION is set to CBL/SAT the cable
converter connected to the TV can operate using 1 to
4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
4 CH r/s
Press CH r or CH s to tune in a higher or lower
channel.
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
1
2
3
4
1
2
3
SAT control buttons
1 SOURCE POWER
Turns the Satellite broadcast tuner power on and off.
2 0 – 9, • (DOT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
LC-26/32GA5U(E)-50-53 05.2.28, 1:22 PM 52