Sharp Aquos LC G5C32U - Manual (Page 25)

24
Basic adjustment settings
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Description
Normal adjustment
For movie image
For still image
Selected item
Standard
Fast
Slow
Press a/b to select “3D-Y/C”, and then
press ENTER. 4
5
Press a/b to select the desired level, and
then press ENTER.
NOTE
• 3D-Y/C is not available for S-video, Component, DVI or
HDMI inputs.
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press ENTER.
Monochrome
For viewing a video in monochrome.
Description
Normal color
For viewing in monochrome
Selected item
Off
On
Repeat steps 1 to 3 in 3D-Y/C.
Press a/b to select “Monochrome”, and
then press ENTER.
1
2
Film Mode (3:2 pull-down)
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
Description
Normal viewing mode
Detects, analyzes, converts film source
Selected item
Off
On
Press a/b to select “Film Mode”, and then
press ENTER.
Repeat steps 1 to 3 in 3D-Y/C.
1
2
3 Press c/d to select “On”, and then press
ENTER.
I/P Setting
Converts input signals from interlace to progressive.
Press a/b to select “I/P Setting”, and then
press ENTER.
Press c/d to select “Fast” or “Slow”, and
then press ENTER.
Repeat steps 1 to 3 in 3D-Y/C.
1
2
3
NOTE
• “I/P Setting” is not selectable when channel display shows
an input resolution of 480P, 720P or 1080I.
3 Press c/d to select “On”, and then press
ENTER.
LC-26/32GA5U(E)-22-26 05.2.28, 1:14 PM 24