Sharp Aquos LC G5C32U - Manual (Page 8)

7
QUICK REFERENCE
IMPORTANT:
The POWER indicator on the AQUOS television
should light GREEN indicating you have power to the
AQUOS television.
If the POWER indicator on
the AQUOS television still
does not light up, press TV
POWER on the REMOTE
CONTROL to turn the power
on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
AQUOS TELEVISION FROM THE OUTLET AND
REPEAT THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE
CONTACT US AT 1-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETTINGS
SECTION for EZ setup and basic channel setup
functions and USING EXTERNAL EQUIPMENT
SECTION for other device connections (DVD, VCR,
AUDIO, etc) in your AQUOS operation manual.
1 Open the battery cover. 2 Insert two “AAA” size batteries
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
3 Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
LC-26/32GA5U(E)-01-13 05.2.28, 1:09 PM 7