Sherwood ST-670 - Manual (Page 28)

PLAYING TRACKS IN DESIRED ORDER [CD only]
Press the PROGRAM button.
1
While displaying the program menu, select the desired track with pressing the NUMERIC buttons.
2
• Up to 20 tracks can be programmed to be played in any desired order.
Example) When the track 5 and 11 are programmed.
Repeat the above step 2 until the desired tracks are programmed.
3
• When programming more than 10 tracks, press the CURSOR / / / buttons to select the “NEXT ” on the bottom of
the program menu, then press the ENTER button.
Note: During programming, only the buttons required for programming of DVD operation buttons will function.
To start program play, press the CURSOR / / / buttons to select the “Start” on the bottom of the
program menu, then press the ENTER button.
4
• Play will start in the programmed order.
• After all the programmed tracks have been played, it enters
the stop mode and the program mode is canceled.
• Then the program menu is displayed on the
TV screen for several seconds.
• Each time the PROGRAM button is
pressed, the program mode is canceled or
the program menu is displayed.
• If the program menu disappears during
programming, the program mode will be
canceled and the programmed tracks will be
all cleared.
28
ENGLISH
PLAYING TRACKS IN RANDOM ORDER[CD only]
During playback, press the RANDOM PLAY button.
• “RANDOM” indicator and “R-” light up and the tracks are
played in random order.
• To return to normal playback, press the RANDOM PLAY
button again.
• After all the tracks have been played, it enters stop mode
and the random play mode is canceled.