Sherwood ST-670 - Manual (Page 41)

41
ENGLISH
• When each password is input correctly, new password is memorized and the previous menu screen is displayed.
• If you input a wrong password, you cannot change the password to the desired. In this case, input the password again.
Note :
• Do not forget the password.
If you forgot your password, input “3308” that has been set to at factory.
1
Press the CURSOR / buttons to select the Password.
2
Press the CURSOR buttons to select the Change, then press the ENTER button.
3
Input 4-digit passwords in sequence for old password, new password and confirmation, then press the ENTER
button.
4
Press the CURSOR button to select the item menu.
Continued
When selecting the Password
5
Set other setups to your preference.