Sherwood ST-670 - Manual (Page 45)

45
ENGLISH
RECORDING WITH TAPE DECK
1
Select the desired input as recording source except TAPE.
2
Start recording on the component connected to TAPE.
Operation of Other Functions
3
Start play on the desired input.
• The volume, tone(bass, treble) settings, etc. have no effect on the recording signals.
• While playing a disc in a Dolby Virtual Speaker or Dolby Headphone mode, the selected mode has effect on the recording signals.
DIGITAL AUDIO RECORDING WITH MD RECORDER
1
Select DVD as recording source.
2
Start recording on the component connected to OPTICAL DIGITAL OUT.
3
Start play on DVD player of the unit.
• When the OPTICAL DIGITAL OUT of the unit is connected to the DIGITAL IN of an MD recorder or CD recorder, you can
enjoy high-quality sound of digital recording.(Refer to “CONNECTING AUDIO/VIDEO COMPONENTs” and “CONNECTING
DIGITAL OUT” on page 7 and the operating instructions of the MD recorder or CD recorder.)
Notes :
• Digital recording is available for the digital audio program sources such as CDs, MP3 discs, some DVDs, etc.
• In most DVDs as well as some CDs recorded in bitstream signal format, digital recording may not be available.
In this case, you should set the SPDIF Output to (SPDIF/)PCM.(Refer to “When selecting the SPDIF Output” on page 35.)
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of
your digital recording equipment to know what restrictions are imposed.