Sherwood ST-670 - Manual (Page 43)

43
ENGLISH
LISTENING TO RADIO BROADCASTS
1
Select the desired band.
2
Press the TUNING UP( ) or DOWN( ) button for more than 0.5 second.
• Then “AUTO” in indicator lights up on the display.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and “TUNED”.
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
• Press the button repeatedly to select FM or AM band.
Operation of Tuner
Auto tuning
• Manual tuning is useful when you already know the frequency of the desired station.
• After selecting the desired band with pressing the “FM/AM” button or “FUNCTION” button, press the TUNING UP( ) or
DOWN( ) button repeatedly until the right frequency has been reached.
Manual tuning
1
Tune in the desired station with auto or manual tuning.
2
Press the PROGRAM button.
• Then the preset number (“01”,etc.) is flickering for several
seconds.
• If flickering the preset number stops, press the PROGRAM
button again.
Presetting radio stations
• You can store up to 30 preferred stations in the memory.