Sherwood ST-670 - Manual (Page 50)

ENGLISH
50
Continued
1
Press the SLEEP/TIMER button for more than 2 seconds to enter the timer setting mode.
• “TMR ON”(or “TMR OFF”) is displayed.
• To cancel the timer setting mode, press this button for
more than 2 seconds again.
• Each time the ENTER button is pressed, the timer mode
changes as follows :
“TMR ON” : Timer on mode(“ ” lights up.)
“TMR OFF” : Timer off mode(“ ” goes off.)
• Then the timer is deactivated.
2
Select the timer off mode.
3
To confirm your selection, press the SLEEP/ TIMER button for more than 2 seconds.
When canceling the TIMER
ADJUSTING THE BRIGHTNESS OF THE DISPLAY
• Each time the DIMMER button is pressed, the brightness
of the display changes as follows :
On dim off
• In the display off mode, pressing any button will restore
the display on mode.