Schwinn 438 - Manual (Page 48)

46
M
A
IN
T
E
N
A
N
C
E
MAINTENANCE
To move the Schwinn ® 438 elliptical trainer,
carefully lift the rear end of the machine. Steer
the machine to the desired location. Be gentle
while moving the unit as any sharp impact
directly or indirectly to the computer can affect
computer operation.
Moving your Schwinn ® 438 Elliptical Trainer
Leveling your Schwinn ® Elliptical Trainer
Level the elliptical trainer to compensate for
uneven surfaces. To level the Schwinn
® 438
elliptical trainer, raise or lower the two leveling
bolts located on the underside of the rear
stabilizer by screwing them in or out as needed.
Maintaining Your Elliptical Trainer
IMPORTANT: To avoid damaging the fi nish on
your elliptical trainer and computer, never use a
petroleum-based solvent when cleaning. Avoid
getting excessive moisture on the computer.
Daily: Before each use, inspect for loose,
broken, damaged, or worn parts. Do
not use your elliptical trainer if found
in this condition; repair or replace.
Weekly: Wipe any dust, dirt, or grime from the
surfaces. Use a damp cloth to wipe
your elliptical trainer and computer
free of sweat.
!,7!93
3%26)#).'
WARNING!