Printing mechanism using ftp, Setting mechanism using ftp, Printing mechanism using ftp -12 – Star Micronics IFBD-HW03/04 User Manual
Page 19: Setting mechanism using ftp -12
IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.6.1. Printing Mechanism Using FTP
It is possible to print by logging in to this product using FTP, then writing the file to the root directory
or to the “Ip” directory (port).
3.3.6.2. Setting Mechanism Using FTP
It is possible to view settings by logging in to this product using FTP, then accessing the “config”
directory (port) and reading the file.
Also, settings are made by uploading settings files from the client.
Setting File Example
MAC addr: 00:80:92:12:34:56
*** USER :anonymou
*** Printer Status :Ready
Web Page Refresh Interval(sec.) :10
<< Configure General >>
Change root Password :" ***** "
NIC Reset Control :ENABLE
<< Configure WiFi - .11b >>
Wireless Mode :Infra.
SSID :"STAR-WIFI"
Channel :11
Use WEP :None
WEP Key :""
<< Configure TCP/IP >>
DHCP/BOOTP :ENABLE
RARP :ENABLE
IP Address :0.0.0.0
Subnet Mask :0.0.0.0
Default Gateway :0.0.0.0
Universal PnP :DISABLE
9100 Multi Session :ENABLE
<< Configure TCP/IP - DNS >>
Primary Server :0.0.0.0
Secondary Server :0.0.0.0
<< Configure TCP/IP - POP >>
POP Protocol :DISABLE
Check Interval(min.) :15
Local Time Zone :"+09:00"
<< Memory Switch Setting >>
Code Page :Codepage 858 (Multilingual)
Black Mark Sensor :Disable
Shows the user name currently
accessing.
Shows the MAC address.
The setting is rejected if the MAC
address does not match this
product when writing settings.
Shows the current printer status.
The password item is masked by *
in the display. The password will
be erroneous if re-written while
masked with *, so settings are not
possible if all characters are *.
•
Setting file format: “Item name;” “Setting” or “Item Name” = “Setting”
•
Item names and settings are separated by a colon (:) or an equal sign (=) in single byte characters.
•
A space or a tab code applied to the head or tail of an item name is ignored.
•
In the following cases, it is ignored and the next line is read.
• The head character of the item name is any other than a number or an alphabetic character.
•
If a value that cannot be set is input, the status prior to that change in setting is returned and the
connection is closed.
When quit normally, the product will self-reboot.
3-12