Star Micronics IFBD-HW03/04 - Manual (Page 22)

IFBD-HW03/04 Product Specifications Rev. 0.00
Startup the command prompt on the targeted PC in the environment outlined above.
In that procedure, operate according to the following steps.
Command Prompt Dump Explanation
C:¥IFBD-HW_FW_1.0.2>dir
There is no volume label for the C drive.
The volume serial number is 387D-6F02.
Directory of C:¥IFBD-HW_FW_1.0.2
2004/12/24 18:13 <DIR> .
2004/12/24 18:13 <DIR> ..
2004/10/28 09:06 887,845 IFBD-HW03_04.bin
1 file: 887,845 bytes
2 directories: 15,553,077,248 bytes of available space
C:¥IFBD-HW_FW_1.0.2>ftp
ftp> open 192.168.222.21
Connected to 192.168.222.21.
220 Star Micronics IFBD-HW03/04 Ver 1.0.0b3 FTP server.
User (192.168.222.21:(none)): root
331 Password required.
Password:
230 User Logged in.
ftp> ls
200 PORT command Ok.
150 Open data connection.
lp
config
flash
226 Data connection closed.
ftp: 19 bytes received in 0.13Seconds 0.15Kbytes/sec.
ftp> cd flash
250 Command Ok.
ftp> binary
200 Type set to I.
ftp> put IFBD-HW03_04.bin
200 PORT command Ok.
IFBD-HW03/04 F/W binary file location
confirmation
Startup the standard Windows FTP command.
Specify the IFBD-HW03/04 IP address
>> IFBD-HW internal FTP server startup message
Log-in as “root” user
No password (In default)
>> Log in successful
Issues Is command for IFBD-HW internal folder
name check
>> Check “flash” folder
Change target folder to “flash”
Change FTP transfer to binary mode
Transfer F/W binary file
3-15