Sealife DC 600 - Manual (Page 23)

User’
s Manual >>
21
The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an
extended period of time.
Follow the steps below to set the current date and time.
1. Slide the mode switch to [ ] or [ ].
2. Press the MENU button and select [Setup]
menu with the button
3. Select [Date/Time] with the / buttons
and press the SET button.
The Date/Time setting screen will be
displayed.
4. Select the item’s field with the
/ buttons and adjust the value for the
date and time with the
/ buttons.
The date and time is set in the order
year-month-day-hour-minute.
The time is displayed in 24-hours format.
5. After confirming all settings are correct,
press the SET button.
: Change Value
: Select Item
SET : Adjust
Date / Time
01 01
01 01
2005
MENU:Exit
/ /
:
Capture
Setting the Date and Time