Sealife DC 600 - Manual (Page 68)

Digital Camera >>
66
2. If you select [Images] in the previous step,
the figure shown on the right hand side will
appear. Select [Single] or [All] with the
/
buttons, and press the SET button.
[ Single]: Select to print one specific
image.
[ All]: Select to print all images.
[ Exit]: Exit from Images option.
3. If you select [Single] in the previous step,
the figure shown on the right hand side will
appear.
Select the image that you want to print
with the / buttons.
Select the [Print Num] (up to 99) with
the / buttons.
After selecting the desired image and
printing number, press the SET button
to confirm.
4. Select [Exit] with the / buttons, and
press the SET button.
5. Select [Print] with the / buttons, and
press the SET button to start printing.
6. The printing starts and the figure
shown on the right hand side
appears.
The [COMPLETE] will be
displayed temporarily,
reminding you that the printing
procedure is finished.
If a print error is detected,
the [PRINT ERROR] will be
displayed.
The image printing may fail if the camera loses battery power.
Be sure that your camera battery is freshly charged for best
results.