Sealife DC 600 - Manual (Page 52)

Digital Camera >>
50
8. Select [Date] with the / buttons, and press the SET button.
The date setting screen appears.
9. Select date to [On] or [Off] with the / buttons, and press the SET
button.
On: The date of the photograph will also be printed.
Off: The date of the photograph will not be printed.
10. Select [Print Enable] with the / buttons, and press the SET
button.
11. Select [Execute] with the / buttons, and press the SET button.
This creates a file containing the DPOF information, and when the
operation is finished, the screen returns to the playback mode.
The date that is printed on the photo is the date set on the
camera. To print the correct date on the photo, set the date on
the camera before you photograph the image. Refer to section
in this manual titled
“Setting the Date and Time” for further
details.
Before you perform the DPOF settings on your camera, always
remember to copy your images from the internal memory to an
SD card first.
DPOF function is only activated when SD card is inserted into
the camera and saved images captured by this camera.