Sealife DC 600 - Manual (Page 91)

User’
s Manual >>
89
Installing the Flash Link optical cable adapter
The Flash Link adapter connects the SeaLife Flash Link optical cable (item
# SL962 - optional accessory) to the DC600 camera. This adapter is only
needed when using the SeaLife External Flash (item # SL960 – optional
accessory) or Digital Flash (item # SL960D – optional accessory). It is
strongly recommended to purchase the Flash Link optical cable accessory
if you are using a SeaLife external Flash to ensure it fires all the time.
Step 1: Insert end of Flash Link optical cable
into one of the adapter holes as
shown. Push cable in all the way
until the end of the cable is directed
at the camera’s flash.
Step 2: Use small wrench provided to
tighten set screw until you feel
some resistance. Do not over
tighten! Gently pull on cable to
check that it is firmly attached.