Shenzhen High Power Tech H7920 - Manual (Page 27)

Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration
M80-792001-01 43
Rate
Setup serial port interface data rate:
300/600/1200/2400/4800/9600/19200/38400/57600/115200(BPS)
Parity
Select parity: None/Odd/Even
Data Bits
Setup data bits: 5/6/7/8bits
Stop Bits
Setup stop bits: 1 or 2bits
Flow
Setup flow control: None/Hardware/Software (Xon/Xoff)
Operation Mode
For industrial applications, requirements may be different from customer to
customer. There are five modes available in Chinese market. Presently, there is
only one timing mode in English version available. Hongdian can design new
customized operation modes for any other market.
Click "Start"->"Special Setting"->"Operation Modes" menu to start this setup
page.
Timing operation mode can be configured:
Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration
M80-792001-01 44
Operation Mode: Enable or disable.
Timing: Specified the online time and offline time, press ADD button
to add the timing plan to the time schedule.
Schedule: Display the specified time schedule. Select a timing plan
and press DEL button to delete it.
Note:
1. If the time plan covers two days, it will separate into two timing plans at the
time schedule, i.e.:
Set the time from 23:00:00 to next 05:00:00,
it will separate into 23:00:00~23:59:59 and 00:00:00~05:00:00
2. The router clock should be enabled if the timing mode is enabled.
Backup Routing
For many applications, customer may require backup routings to protect their
communication. There are two backup channel can be set up, customer can set
the GPRS/EDGE/CDMA 1x channel as the main channel, and set the Ethernet or
dial-up channel as the backup route.
Click "Start">"Special Setting">"Backup Routing" menu to start this setup page.
This function can be "Enable" or "Disable".
When it is enabled, the "W-ICMP detecting" at the "Network Basic Setting" page
will not effect.
Default Route: Select Galaxy router default routing, it is the main route.
There are three types of route can be selected: Radio, Ethernet and COM
(connecting with a dial-up modem). When Ethernet or COM is set as default,
the Radio will be the backup.