Shenzhen High Power Tech H7920 - Manual (Page 33)

Galaxy H7920 Mobile Router User Manual Appendix 1: Hypertext Terminal Setting
M80-792001-01 55
4. ASCII Setup
Click “ASCII Setup” button, set ASCII parameters.
Galaxy H7920 Mobile Router User Manual Appendix 2: Firmware Update Tool
M80-792001-01 56
Appendix 2: Firmware Update Tool
This appendix describes Galaxy router firmware update tool user instructions.
Galaxy H7920 Firmware Update Tool
Set up the PC IP address subnet same as the router that will be updated.
Copy the Router Update Tool to the PC and run it (Fig. 1):
Fig. 1
Click “Browse” button to retrieve the .rom file (Fig. 2)
Fig. 2
Input Router IP, factory default IP is 192.168.8.1; the Router IP could be the LAN
IP or WAN IP address (WAN IP is the address assigned by service provider
gateway; normally it is a dynamic address). Type the correct password (this is
the password you access router configuration web interface; factory default is
hongdian). Press “Connect” button (Fig. 3), and waiting few seconds. If dialogue
info appears (Fig. 4), it means the connection failed. Otherwise, it is successfully
connected.