Sony BRS-200 - Manual (Page 147)

147
Specifications
App
end
ix
General
Power requirements
Processor Unit: 100 to 240 V AC, 50/60 Hz
Control Panel: 12 V DC
DC input Control Panel: 12 V DC, JEITA type 4 × 1
Power consumption
Processor Unit: 125 W (when the maximum number of
interface boards is installed)
Control Panel: 12 W
Current consumption
Processor Unit: 1.2 to 0.6 A (100 to 240 V AC)
Control Panel: 1 A
Operating temperature
5°C to 40°C (41°F to 104°F)
Dimensions Processor Unit: 430 Ч 44 Ч 430 mm (17 Ч 1
3
/
4
Ч 17 inches)
(w/h/d)
Control Panel: 424 Ч 138 Ч 222 mm (16
3
/
4
Ч 5
1
/
2
Ч 8
3
/
4
inches) (w/h/d)
Mass Processor Unit: Approx. 7.5 kg (16 lb 9 oz) (not including an
optional interface board)
Control Panel: Approx. 3.6 kg (7 lb 15 oz)
Supplied accessories
AC power cord (1)
AC power adaptor (1)
Power cord for AC power adaptor (1)
Control cable (for connection between the Processor Unit and
Control Panel) (1)
Rack mounting bracket (1 set)
RS-422 connector plug (1)
Power cord stopper (1)
DC IN plug retainer (1) and screws (+M3 × 6) (2)
Quick Reference Guide (1)
Operating Instructions (1)
Warranty (1)
Optional accessories
BRSA-20HSD1 HD/SD-SDI input board
Video input
BNC type × 4, 800 mVp-p, 75 ohms
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SD-SDI: 270 Mbps
The frame synchronizer function is built in for all the inputs.
BRSA-20DD1 DVI input board
DVI-I input
DVI-I (Single Link) × 1
DVI-D: Resolution XGA, WXGA, SXGA (HDCP not
supported)
RGB: R/G/B: 0.7 Vp-p, H/V: TTL
Resolution XGA, WXGA, SXGA
BRSA-20DD2 DVI output board
DVI-I output
DVI-I (Single Link) × 1
DVI-D:
Resolution HD mode: XGA, WXGA, SXGA, WUXGA
SD mode: XGA, WXGA, SXGA
(HDCP not supported)