Sony BRS-200 - Manual (Page 151)

151
Specifications
App
end
ix
To Use the VISCA RS-422 Connector Plug
The VISCA RS-422 connector plug is inserted into the RS-422 connector on the
switcher at the factory.
1
Grasp both ends of the VISCA RS-422 connector plug and pull it out, as
shown in the illustration.
2
Insert a wire (AWG Nos. 28 to 18) into the desired wire opening on the
VISCA RS-422 connector plug and tighten the screw for that wire using a
flathead screwdriver.
3
Insert the VISCA RS-422 connector plug into the VISCA RS-422
connector.
• In order to stabilize the voltage level of the signal, connect both ends to GND.
• When the connections using the VISCA RS-422 connectors are made, the
VISCA RS-232C connection is not available.
• The maximum connection distance with the VISCA RS-422 connection is
about 1,200 m (3,937 feet).
Notes
1
2
3
4
5
Flathead screwdriver
Wire
1
2
3
4
5