Sony BRS-200 - Manual (Page 61)

61
Basic Setups for the Switcher
Chapt
er
3
Pre
par
at
ion
s
Rebooting the switcher is required after the settings are changed, and
“Reboot system? [PAGE] (yes) or [EXIT] (no)” appears on the display
panel.
6
Press the PAGE button.
The switcher reboots, and the changed settings are enabled.
If “FTP” is set to “Disable,” the connection between the switcher and the
computer via LAN is disconnected. The switcher will not respond to any
response such as ping from the connected computer.
Note