Sanyo VCC-ZM300 - Manual (Page 18)

LENS SETTING (LENS)
This item allows adjustment of focus (for manual focus or autofocus) and adjustment of zoom when needed.
FOCUS setting
☞ Setting the manual focus (MANU)
Sets a limit for near distance focusing and sets focus speed for manual focus.
1
Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2 Use the cursor button (d or c) to select MANU, then
press the SET button.
The FOCUS SETTING screen will appear.
3 LIMIT NEAR focus distance setting
Use the cursor button (j or l) to move the cursor to
LIMIT NEAR, then use the cursor button (d or c) to
change the distance value. (Ex: 3M)
Available settings: 1M (meter), 3M, 5M, 10C (centimeters),
30C, 50C
Note: Focusing becomes difficult when near distance limit is set
to less than “ 1M”.
4
SPEED of focus setting
Use the cursor button (j or l) to move the cursor to
SPEED, then use the cursor button (d or c) to select the
focus adjustment speed value. (Ex: 3)
Available settings: 1, 2, 3, 4 (Quickest speed)
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
1 2 MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
LENS
FOCUS MANU ‚
ZOOM SET ‚
FOCUS SETTING
LIMIT NEAR 1M
SPEED 2
PRESET OFF
MENU BACK
3 FOCUS SETTING
LIMIT NEAR 3M
SPEED 2
PRESET OFF
MENU BACK
4 FOCUS SETTING
LIMIT NEAR 3M
SPEED 3
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
En
g
lis
h
17