Sanyo VCC-ZM300 - Manual (Page 6)

PARTS NAMES AND FUNCTIONS
Camera installation bracket
The bracket can be fixed at the top or bottom of the camera.
When fixing the bracket, be sure to use the longer screws and
install the shorter screws on the opposite side to seal the
openings.
CAUTION: When installing the camera bracket, select a location
that can support the total weight of the camera and
accessories.
Control terminals (See p7)
1 Zoom terminal (ZOOM)
Sets the zoom to wide angle or telescoping.
2 Focus terminal (FOCUS)
Sets the focus to infinite or close range.
3 Grounding terminal (COM)
4 Alarm output terminal (ALARM OUT)
A detection alarm based on the motion sensor is sent to
connected equipment such as a buzzer or lamp or a time
lapse VCR device.
5 Alarm input terminal (ALARM IN)
Used for detection of intruders through a connected
external alarm switch.
FOCUS ALARM
IN ZOOM COM
12345
OUT
L5AA2/US GB 2002, 5, 24
En
g
lis
h
5