View setting – Sanyo VCC-ZM300 User Manual
Page 25
VIEW SETTING
A
IRIS setting
There are 2 possible settings for IRIS, autoiris (AUTO) and manual iris (MANU).
Autoiris setting (AUTO)
Sets backlight compensation, magnification of electronic
sensitivity and iris level.
1
Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear and AUTO for IRIS will
be blinking.
Available settings:
•
AUTO: Sets automatic adjustment of iris.
•
MANU: Sets manual adjustment of iris.
Note: When AUTO is selected, the following 3 types of detailed
backlight compensation settings will be available.
•
Multi-spot evaluative metering (MULT)
•
5 spot centerweighted average metering (CENT)
•
48 multi-spot metering (MASK)
2
Press the SET button.
The IRIS SETTING screen will appear.
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER LONG ‚
MOTION OFF ‚
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
1
L5AA2/US GB 2002, 5, 24
Eng
lish
24