Sanyo VCC-ZM300 - Manual (Page 45)

VIEW SETTING
F Automatic gain control (AGC) setting
Sets AGC to ON or OFF and adjusts the gain.
1
Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
2 Use the cursor button (j or l) to move the cursor to
AGC, and then use the cursor button (d or c) to select
the compensation level.
Available settings:
• ON: DNR (digital noise reduction) can be set
• OFF: Fixed gain values can be adjusted manually.
☞ When ON is set
1 Use the cursor button (d or c) to select ON then press
the SET button.
The GAIN SETTING screen will appear, and “ ± 0dB” will be
blinking for MAX GAIN.
2 Use the cursor button (d or c) to select the gain.
Available settings: –6dB, ± 0dB, +6dB, +9dB
3 Use the cursor button (j or l) to move the cursor to
DNR, and then use the cursor button (d or c) to select
ON.
Available settings:
• ON: DNR (Digital Noise Reduction) is applied. Noise from
low light will be reduced.
• OFF: DNR will not be applied.
Note: Digital noise reduction works as gain control becomes
greater. If images for moving target objects have blurs or
afterimages, reduce the resolution sensitivity.
☞ When OFF is set
1 Use the cursor button (d or c) to select OFF, then press
the SET button.
The GAIN SETTING screen will appear, and “0dB” will be
blinking.
Available settings: 0 – 30dB
2 Use the cursor button (d or c) to adjust the gain.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
1 2
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER LONG ‚
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
GAIN SETTING
MAX GAIN ±0·
DNR OFF
GAIN SETTING
ъ------+------ь 0·
(When ON is set) (When OFF is set)
L5AA2/US GB 2002, 5, 24
Eng
lish
44