SSD COMPANY LIMITED 420 - Manual (Page 18)

18 Microline 420/421 User’s Guide
Changing the Forms Tear-Off Setting
Note: The default setting for Forms Tear-Off is OFF.
To change the Forms Tear-Off setting:
1 Press SHIFT (2) + SEL (1).
2 Press GROUP (3) repeatedly until the Rear Feed or Bottom
Feed group shows in the first column of the printed line,
depending on which paper feed you are using,
3 Press ITEM (4) repeatedly until Form Tear-Off appears in the
second column:
Rear Feed Form Tear-Off Off
4 Press SET (5) until the time interval you wish to select
appears in the third column:
Rear Feed Form Tear-Off 1 Sec
5 Press SHIFT (2) + SEL (1) to exit Menu Mode and save the
setting.
Manual Forms Tear Off
If you don’t wish to engage the Forms Tear-Off feature, you
can advance
• rear-feed continuous forms loaded on the built-in tractor
or
• bottom-feed continuous forms loaded on the optional push
tractor
up to the tear off position manually by pressing TEAR (5).
Paper Park
Important!
Never park labels!
Paper park allows you to switch to single-sheet printing without
removing continuous feed paper from the printer.
When you wish to print single sheets, simply press PARK (6) to
retract the continuous form paper from the paper path, then lift
the sheet guide, load the sheet and send the print job.