SSD COMPANY LIMITED 420 - Manual (Page 87)

Installation 87
CAUTION! The printhead may be HOT!
3 Unpack the new ribbon cartridge and install it on the
printhead.
Important!
Do not remove the ribbon shield (1) from the ribbon!
4 Turn the take-up knob (1) in the direction of the molded-in
arrow to take up any ribbon slack.
5 Close the access cover and turn the printer on.
Install the Ribbon Cartridge
Important!
Make sure you have the correct replacement ribbon for your
printer. The wrong ribbon will not print when installed in
your printer.
Ribbon Cartridge Handling
• Leave unused ribbon cartridges in their packages until
needed.
• Careful; the ribbon ink may cause permanent stains.
• Ribbon ink on skin or clothing can usually be removed with
soap and water.
1 Make sure the printer is turned OFF.
2 Open the access cover and center the printhead (1).