ShelterLogic ViewPhone 3 VS14032 - Manual (Page 7)

vi
Important Safety Instructions
5. DO NOT place objects on top of the device, as objects may scratch the screen.
6. DO NOT expose the device to dirty or dusty environments.
7. DO NOT place the device on an uneven or unstable surface.
8. DO NOT insert any foreign objects into the device.
9. DO NOT expose the device to strong magnetic or electrical field.
10. DO NOT expose the device to direct sunlight as it can damage the LCD Screen.
Keep it away from heat sources.
11. Do not store your device in temperatures higher than 47°C (116°F). The operating
temperature for this device is from 0°C (32°F) to 47°C (117°F).
12. DO NOT use the device in the rain.
13. Please check with your Local Authority or retailer for proper disposal of electronic
products.
14. The device and the adapter may produce some heat during normal operation or
charging. DO NOT leave the device on your lap to prevent discomfort or injury
from heat exposure.
15. POWER INPUT RATING: Refer to the rating label on the device and be sure that
the power adapter complies with the rating. Only use accessories specified by the
manufacturer.
16. DO NOT use a pen or any sharp object to tap the screen.
17. Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly
before cleaning. Never use abrasives or cleaning solutions.
18. Always power off the device to install or remove external devices that do not
support hot-plug.
19. Disconnect the device from an electrical outlet and power off before cleaning the
device.
20. DO NOT disassemble the device, only a certified service technician should
perform repair.
21. The device has apertures to disperse heat. DO NOT block the device ventilation,
the device may become hot and malfunction as a result.
22. Risk of explosion if battery replaced aced by an incorrect type. Dispose of used
batteries according to the instructions.
23. Users have to use the connection to USB interfaces with USB 2.0 version or
higher.
24. PLUGGABLE EQUIPMENT, the socket-outlet shell be installed near the
equipment and shall be easily accessible.