SpectronIQ PLTV-20NW32 - Manual (Page 17)

OMPLTV20NW32.book Monday, Dec. 04, 2006 9:37 PM
Setting Up the Display
U sing the B uttons on the D isplay
There are a number of touch-sensitive buttons at the bottom right of the screen. To press one,
simply touch its label.
Turning the D isplay O n and O ff
There is a power switch on the bottom of the display and a power button on the front of the
display and on the remote. The power switch is used to cut off power completely, whereas the
power button turns the screen off but allows the remote to continue working.
To turn the display on:
1.
If the power light on the front of the display (bottom right) is off, turn on the power switch
on the bottom of the display.
2. Press the power button.
To turn the display off:
1.
Press the power button.
2. If the display will be unused for an extended period of time, turn off the power switch on the
bottom of the display and disconnect the power.
Selecting th e Video and A udio Sou rce
The signal source may come from any of the input blocks on the sides or bottom of the display.
The SOURCE button cycles through these.
To change the audio/video source, press the SOURCE button until the correct source is selected.
The SOURCE button cycles through the following sources:
• TV
• DVI
• Component
• Video
• S-Video
• VGA (RGB)
Adjusting th e Volu m e
The audio volum e may be adjusted from the remote or the front of the display.
To change the volume, press the VOL
and VOL buttons on the display or the VOL and
VO L
buttons on the remote.
Selecting the Television C hannel
The television channel may be selected from the remote or the front of the display.
9