Setting your display for the first time – SpectronIQ PLTV-20NW32 User Manual
Page 19
Advertising
OMPLTV20NW32.book Monday, Dec. 04, 2006 9:37 PM
When you turn on your LCD for the first time, you will need to set up the display for proper
operation by scanning the television spectrum for available channels.
To scan all channels:
1. Turn the display on using the power button.
2. Press SOURCE until the signal source is set to DTV.
3. Press ME NU to bring up the On-Screen Display (OSD).
4. Press
until the Setup menu shows.
5. Press
until Time Zone is highlighted, then
press until the correct tim e zone is selected
and press Source .
6. Press
until the Channel menu shows.
7. Press
until Auto Program is highlighted
and then press Source to begin scanning
for available television channels.
Setting Your Display for the First Time
11
Advertising