Southwestern Bell GH3210 - Manual (Page 24)

24
local telephone company in order to re-
ceive Call Waiting Caller ID information.
Reviewing New Call Records
1. When Time/Date screen is displayed,
pressing the or button displays the
information of the last new call received.
2. Continue pressing or button to
review all new call records in the order
the calls were received.
3. After the final call has been displayed,
press the or button again. The New
Call LED will stop blinking and the LCD will
show “END NEW CALL”.
Reviewing All Call Records
1. After you have reviewed all of the new
calls, press or button. The LCD display
will show the calls stored in memory.
2. After the last call record is reviewed,
the LCD will show “ END OF LIST”.
END OF LIST
telephone number will display on the LCD.
The New Call LED on the antenna will
flash until you review ALL your new calls.
The Caller ID information (of up to 50
callers) will be stored in the order
received.
NOTE:
If you answer your incoming call before
the second ring, the unit will not display
the call information.
Receiving Call Waiting Caller ID
When you are on an existing phone call,
your GH3210 will display incoming call
waiting Caller ID information.
1. You will hear a beep and the telepho-
ne will be muted momentarily while the
LCD display shows the Caller ID informa-
tion of the second caller.
2. When you access the call waiting call,
the Caller ID information will disappear and
the Time/Day screen will be displayed.
IMPORTANT:
You must subscribe to Call Waiting and
Call Waiting Caller ID service from your
CALLER ID OPERATION
END NEW CALL
VOL
S
C
R
O
L
L
VOL
S
C
R
O
L
L
S
C
R
O
L
L
896-1234
JOE SMITH