Caller id operation (cont.), Caller id redial, Caller id erase to erase a single call – Southwestern Bell GH3210 User Manual

Page 25

Advertising
background image

Caller ID Redial

THE AREA CODE MUST BE PROGRAM-

MED IN ORDER TO FULLY UTILIZE THE

REDIAL FEATURE(SEE PAGE.18).

The GH3210 allows you to redial a phone

number stored in the Caller ID memory.

1. Press the or button to select the

Caller ID number that you want to dial.

2. Press and release the REDIAL button

which activates the handset to dial the

desired number

3. 10 digits without a 1:

In some areas of the country,the area

code must be included even when di-

aling a local call. In this situation, set

your GH3210 area code to another 3

digits not being used in the U.S. (i.e.

100...etc). Once your area code is

programmed as above, your GH3210

will record all 10 digits for every in-

coming call. Since the prefix 1 will be

added automatically when dialing a 10

digit number, press the REDIAL button

TWICE WITHIN 2 SECONDS for a local

10 digit call without a prefix 1.

4. 10 digits with a 1:

Since the prefix 1 will be added

automatically when dialing a 10 digit

number, simply press the REDIAL

button ONCE to make your call.

To Store a Caller ID Number to

Memory

1. Press or buttons to select number

from Caller ID list.

CALLER ID OPERATION (CONT.)

2. Press MEM button. The LCD display will

show “ENTER LOCATION?”

3. Enter memory location (0~9).

4 The LCD display will show “SAVE OK”.

Caller ID Erase
To Erase a Single Call

1. Press the or button to review the

Caller ID records you received.

2. Press FLASH/DEL button to erase the

call displayed. The display will show “

DELETE ITEM ?” on the bottom line.

3. Press FLASH/DEL button again; the

Caller ID will be erased and the display

will show the next message.

NOTE:

If the current message displayed is the

last message, then the display will return

to Stand-By mode.

To Erase All Calls

1. Press the or button to review the

Caller ID records received, before eras-

ing all calls.

2. While the display is showing any CID

number, press and hold the FLASH/ DEL

button for 2 seconds. The display will

show “ DELETE ALL ?” on the bottom line.

1-555-896-1234

DELETE ITEM ?

VOL

S

C

R

O

L

L

S

C

R

O

L

L

25

Advertising